Hiby FD5 Balanced Desktop DAC/Amp

$729.00

Description

 

  • Cyberpunk exterior design with all metal chassis
  • 1523mW output power for a wide range of headphones
  • Isolated power supply
  • Class A/AB Amplification
  • High resolution Bluetooth support
  • DSD512 / PCM768kHz 32bit format support
  • 4.4mm balanced + 3.5mm single ended output
  • Independent line-level output
  • Colour OLED Display

HiBy’s first DAC/amp is not without flagship genes despite being on a budget. It not only borrows its analog stage from the R8II statement DAP. It also goes one better, doubling the output transistor count on FD5 to 32 to handle the abundant current its separate power supply can produce.

 

With such a discrete output stage HiBy immediately takes a big step ahead of the chasing pack of pedestrian op-amp competitors. Its individual transistors provide the power necessary to push big HIFIMAN and Rosson Audio Designs – not to mention Subtonic Audio’s Storm and Symphonium Audio’s Crimson – on a budget.

The ability of discrete output devices to handle current and push power is a given, and a necessary HiBy trademark given FD5’s power supply sporting several thousand microfarads of filtering capacitors. It’s a powerhouse that’s escaped the pocket and now has the stage, and the limelight.

 

At the tip of HiBy’s spear, an abundance of 32 output transistors ensure excellent current-handling for good reason, to reap the full benefit of FD5’s separate power supply that can draw power from the wall on demand. They can be biased into Class A, if you so choose.

Differentiating itself from even other flagships that cling to op-amp layouts seeking THX-certification but with inordinate amounts of gain and feedforward/feedback, HiBy’s linearity remains excellent already in the open-loop, owing to its high Class A bias.

 

FD5’s quiescent current ensures individual transistors are working in optimum condition. Distortion and noise are kept low, without resorting to the excessive use of negative feedback. The fidelity of four Asahi Kasei Microdevices (AKM) DACs are totally preserved.

To build on its impressive, regulated, miniature power supply, HiBy designed a true-balanced differential amplifier to further improve FD5’s linearity, and you can count on common-mode rejection at its best whenever you plug in via 4.4mm preserving its resolution.

 

Send this brute power into your transducers directly, or set up FD5 as a hub to also decode digital for a downstream amplifier via separate line outputs around back. It brings convenience too – on top of its USB input, it accepts Bluetooth LDAC feeds too.

 

Model HiBy FD5
Dimensions 115 x 115 x 52.7 mm
Display 1.1″ OLED
Weight 698 g
DAC Section 4x AKM4493 DAC Array
Controls Fn button, A/AB mode switch, Gain switch, volume knob, Power button
Audio Format Support PCM 768 kHz/32-bit, Hardware Decoding
Status LED Operating mode indicator (Purple: USB; Blue: Bluetooth)
USB Port Type-C
Headphone Outputs 3.5mm TRS and CTIA-spec TRRS compatible SE headphone out, 4.4mm balanced headphone out
Line Output 3.5mm, 4.4mm

 

Line out Specifications

LO Output

3.5 LO

4.4 LO

Output Level

2.0Vrms (unloaded)

4.0Vrms (unloaded)

Output Level

2Vrms (10 kiloOhms)

3.9Vrms (10 kiloOhms)

THD+N

0.0003%

0.0004%

Noise

1.64

2.2u

SNR

122dB

126dB

Dynamic Range

123dB

126dB

Crosstalk Rejection

99dBr

96dBr

Frequency Response

20-90kHz

20-90kHz

 

3.5mm Headphone Out Specifications

3.5m HP Output

3.5PO (Class AB)

3.5PO ( Class A)

Output Level

4Vrms (unloaded)

4Vrms (unloaded)

Output Level

3.9 Vrms (32 ohms)

3.9Vrms (32 ohms)

Maximum Output Power

475mW

475mW

THD+N

0.0006%

0.0006%

Noise

2.8 uV

2.8 uV

SNR

123dB

123dB

Dynamic Range

124dB

124dB

Crosstalk Rejection

68dBr

68dBr

Frequency Response

20-90kHz

20-90kHz

 

4.4 mm Headphone Out Specifications

4.4 BAL Output

4.4 BAL (Class AB)

4.4 BAL (Class A)

Output Level

8 Vrms (unloaded)

8 Vrms (unloaded)

Output Level

7.0Vrms (32 ohms)

7.0Vrms (32 ohms)

Maximum Output Power

1523mW

1523mW

THD+N

0.0004%

0.0004%

Noise

3.6 uV

3.6Ñ€ uV

SNR

125dB

125dB

Dynamic Range

127dB

127dB

Crosstalk Rejection

106dBr

106dBr

Frequency Response

20-90kHz

20-90kHz

Additional information

Weight 1 kg

Reviews

There are no reviews yet.

Be the first to review “Hiby FD5 Balanced Desktop DAC/Amp”

Your email address will not be published. Required fields are marked *