The HRT iStreamer-Alternating Current (AC) is a product that makes the music coming out of your iPad, iPhone, or iPod sound dramatically better when connected to a music entertainment system in either a home/office setting or in a vehicle. The iStreamer AC is not designed to be used with PC or Mac computers like the other HRT Music Streamers. Rather, it is a high performance external sound card/audio interface that has been specifically designed to exclusively interface with modern iDevices such as the iPod Touch® (1st, 2nd, 3rd, 4th, and 5th gen), iPod Classic®, iPod Nano® (2nd, 3rd, 4th, 5th, and 6th gen), iPhone 4®, iPhone 3GS®, iPhone 3G®, iPhone®, iPhone5®, iPhone5S®, iPhone5C®, iPad®, iPad (3G)®, iPad 2®, the New (2012) iPad®, and the iPad Mini®. The iStreamer AC redirects the digital music stream from the iDevice to itself, bypassing the iDevice’s own internal Digital-to-Analog converter (DAC) and uses its own DAC instead, taking over the job of decoding the digital bits into analog music, allowing a far higher level of sonic performance than if listening directly from an iDevice.
The iStreamer AC uses a (provided) 5VDC power supply to connect to an AC outlet in your home or office**, and is very easy to operate. Simply connect one end of the supplied RCA cables (or any set that you prefer to use) to the two RCA jacks on the iStreamer AC, then connect the other end of the RCA cables to any available analog input (except a PHONO input, which is for analog turntables only) on your integrated amplifier, preamp, receiver, power amplifier with attenuators, or powered speakers. Next, make sure that your iDevice is in “standby” mode (where the device is powered on, but has the black screen showing), and connect the included/proprietary (you must use the HRT-supplied cable, as the Apple stock synch cable has a different pin configuration and will not function correctly) synch cable from the iStreamer AC to your iDevice. Then, attach the cable from the (plugged-into-the-wall) power supply, and look for a brief flash of the amber lights on the iStreamer AC that indicates that it has successfully powered on, and finally, watch for the single blinking amber light that indicates that the iStreamer AC has successfully "paired" with your iDevice. Once you see this light blinking, you can go directly to iTunes and start playing music with up to CD-quality sound, depending on the quality and resolution of the song file being played*. Even the lowliest MP3 file sounds richer, bolder, and more dynamic compared to playing the same song directly from the iDevice, but CDs ripped at full 16/44.1k resolution sound fantastic.
The iStreamer AC provides full support for applications designed to run on an iPad®, iPhone®, or iPod®, as well as allowing you to listen to internet radio stations and streaming music services, as well as the audio content of on-line movie services such as Netflix and the like.
With its Apple-approved, ultra high performance circuitry, and "host mode" of operation that eliminates jitter in the digital interface, the iStreamer AC, combined with your iDevice, renders a CD player and a library of physical discs effectively obsolete. For the first time, without having to tether your iDevice to a "middleman"-style docking unit and separate Digital-to-Analog Converter (DAC), you can enjoy a level of sound quality in your home entertainment system or vehicle never before possible from a portable audio device. A great side benefit of using the iStreamer AC is that it actually charges your iDevice as it plays music, extending its playtime.
iStreamer's host mode eliminates jitter.
Line-Level analog output.
16 Bit operation.
Supports 32k, 44.1k & 48k sample rates.
Endplate LED lights identify sample rate.
External 2.1 Amp power supply included.
Custom sync cable included.
Designed and manufactured in Southern California.
Full Scale Output2.25 Volts RMS
Frequency Response (20 Hz/20 kHz)0dB/-.4dB
Noise Floor (DC to 30 kHz)28 uV
S/N Ratio (DC to 30 kHz)98 dB
THD+N (1 kHz FS 44.1 kS/s).002%
Data Rate32k, 44k1 or 48k
Sample Depth16 bit
Transfer ProtocolHost Mode (master)
Charge outputup to 2.1 Amp
Dimensions4.6" x 2.3" x .875"