Dali Zensor 5.1 Speaker Package B
Dali Zensor 1 Bookshelf Speakers
Dali Zensor Vokal Center Speaker
Dali Zensor 3 Bookshelf Speakers
Dali Sub E - 12F Subwoofer
Dali Zensor 1 Bookshelf Speakers
Making sense! That’s what ZENSOR 1 is up to, packing as much legacy and music as possible into a slim and compact cabinet that you can carry home under your arm.
The versatile ZENSOR 1 is ideal as all-round stereo loudspeaker preferably in small to medium sized rooms. It even works excellently as front speaker in a 2.1 surround set-up or as back speaker in 5.1 systems including subwoofer, as the distinguished and discreet sound resource it is.
Distinguished by it well-known DALI signatures such as the light and yet stiff wood fibre cones delivering a highly dynamic, detailed, and undisturbed sound reproduction, while ultra-low mass dome tweeter material ensures a widely extended frequency range.
Discreet by its dimensions (H: 27.4 x W: 16.2 x D: 22 cm), 6-litre cabinet, and its design dressed in high-gloss lacquer finish that blends perfectly into a modern day interior.
The soundproof design ideas of DALI provide the background for ZENSOR 1, created in respect and admiration of music. From the overall and basic properties to any detail such as the integrated wall bracket, rounded edges, and rear-mounted bass reflex port.
ZENSOR 1 simply succeeds in converting amplifier power into pure acoustical energy without loss or limitations, and it will give pleasure to your ears and eyes over and over with focused, coherent sound and a stylish, visual identity.
ZENSOR 1 Specifications
|
Product Series |
ZENSOR |
|
Speaker Type |
Front |
|
Frequency Range (+/-3 dB) [Hz] |
53 - 26,500 |
|
Sensitivity (2,83 V/1 m) [dB] |
86.5 |
|
Nominal Impedance [Ω] |
6 |
|
Maximum SPL [dB] |
106 |
|
Recommended Amplifier Power [W] |
25 - 100 |
|
Crossover Frequency [Hz] |
2,900 Hz |
|
High Frequency Driver |
1 x 25 mm Soft Textile Dome |
|
Low Frequency Driver |
1 x 5.25" Wood Fibre Cone |
|
Enclosure Type |
Bass Reflex |
|
Bass Reflex Tuning Frequency [Hz] |
51.5 |
|
Connection input(s) |
Single Wire |
|
Magnetic Shielding |
Semi Magnetic Shielded |
|
Recommended Placement |
Keyhole mounting |
|
Dimensions With Base (HxWxD) [mm] |
274 x 162 x 220 |
|
Weight [kg] |
4.2 |
|
Accessories Included |
Manual |
|
Optional Accessories |
White Grille |
|
Finish |
Black Ash Vinyl |
Dali Zensor Vokal Center Speaker
Blood is thicker than water! Naturally, ZENSOR VOKAL is created specifically to match that timbre and tonal balance of its family.
The centre loudspeaker covers an essentially important sound zone, since this is where the majority of dialogue in movie soundtracks is to be found. ZENSOR VOKAL is engineered to cover this zone, thereby establishing a truly realistic voice- and surround experience.
The sonic integration of ZENSOR VOKAL, which should ideally be placed on a shelf below your TV screen, is highly convincing as is the voice matching to the other models of the range.
For high-powered surround solutions, ZENSOR VOKAL including a front mounted bass reflex port is a perfect match to the DALI SUB E-12F.
At best, when watching a magnificent movie, you tend to forget time and space and find yourself absorbed by the characters, plots, and music. ZENSOR VOKAL is created to complete just that sonic illusion of being there yourself.
|
Product Series |
ZENSOR |
|
Speaker Type |
Center |
|
Frequency Range (+/-3 dB) [Hz] |
47 - 26,500 |
|
Sensitivity (2,83 V/1 m) [dB] |
88.5 |
|
Nominal Impedance [Ω] |
6 |
|
Maximum SPL [dB] |
109 |
|
Recommended Amplifier Power [W] |
30 - 120 |
|
Crossover Frequency [Hz] |
2,400 Hz |
|
High Frequency Driver |
1 x 25 mm Soft Textile Dome |
|
Low Frequency Driver |
2 x 5.25" Wood Fibre Cone |
|
Enclosure Type |
Bass Reflex |
|
Bass Reflex Tuning Frequency [Hz] |
45.0 |
|
Connection input(s) |
Single Wire |
|
Magnetic Shielding |
Semi Magnetic Shielded |
|
Recommended Placement |
Above/Below TV Screen |
|
Dimensions With Base (HxWxD) [mm] |
161 x 441 x 288 |
|
Weight [kg] |
6.8 |
|
Accessories Included |
Manual |
|
Optional Accessories |
White Grille |
|
Finish |
Black Ash Vinyl |
Dali Zensor 3 Bookshelf Speakers
DALI ZENSOR 3 is the newest member of the award winning ZENSOR series. This brand new speaker is developed and built to sound much larger than it actually is. Using a 7” woofer based on the technology from the ZENSOR 7 and the tweeter module from the ZENSOR 1, the ZENSOR 3 is able to recreate the high frequencies, the mid range and the low bass in the best possible way..
We have designed the cabinet so that it is large enough to deliver a sufficient, controlled and deep bass and yet is small enough to be placed on a shelf or floor stand.
The woofer cones are made from a blend of fine grained paper pulp reinforced with wood fibres. This mix makes the cones stiff and light which ensures that every micro detail in the signal is reproduced unfiltered.
The 7” woofer increases the surface area by 15% compared to a 6½” woofer and this helps the ZENSOR 3 to deliver the same sound pressure with much less cone excursion, leading to an effortless reproduction of the dynamics in the music.
With a 4 layer voice coil magnet motor system the ZENSOR 3 produces an impressive 17% more B/L compared with speakers using the common 2 layer voice coil. A copper clad aluminum wire ensures optimal reproduction in the mid range, and the power of the magnet motor keep the bass controlled and precise.
The soft dome tweeter module has over and over again proved its ability to deliver a rich and detailed sound, and the module used in the ZENSOR 3 is no exception - delivering an extended frequency response with wide dispersion and low coloration.
ZENSOR 3 Specifications
|
Product Series |
ZENSOR |
|
Speaker Type |
Front |
|
Frequency Range (+/-3 dB) [Hz] |
50 - 26,500 |
|
Sensitivity (2,83 V/1 m) [dB] |
88.0 |
|
Nominal Impedance [Ω] |
6 |
|
Maximum SPL [dB] |
108 |
|
Recommended Amplifier Power [W] |
25 - 125 |
|
Crossover Frequency [Hz] |
2,600 Hz |
|
High Frequency Driver |
1 x 25 mm Soft Textile Dome |
|
Low Frequency Driver |
1 x 7" Wood Fibre Cone |
|
Enclosure Type |
Bass Reflex |
|
Bass Reflex Tuning Frequency [Hz] |
46.0 |
|
Connection input(s) |
Single Wire |
|
Magnetic Shielding |
No |
|
Recommended Placement |
Shelf |
|
Recommended Distance From Wall [cm] |
5 - 30 cm |
|
Dimensions With Base (HxWxD) [mm] |
351 x 205 x 293 |
|
Weight [kg] |
6.3 |
|
Accessories Included |
Manual |
|
Optional Accessories |
White Grille |
|
Finish |
Black Ash Vinyl |
Dali E-12F Subwoofer
The launch of the DALI SUB E-12 F marks a new stage of what is possible at this level of subwoofers.
The new subwoofer from DALI features a 12” woofer, capable of moving plenty of air with power and precision. The cone is made from pure aluminium for maximum stiffness and a becoming exterior. Furthermore, the heavy magnet system wields a massive 4-layer, long-stroke voice coil. All in all, the heavy-duty abilities of this “motor system” ensure that the woofer always follows the signal from the amplifier!
The heart of this subwoofer is the 170W RMS Class D amplifier with a highly linear response. Embracing a classic DALI trademark, it simply acts as a total low frequency extension of your AV system. The result is a powerful, well-balanced bass reproduction and flawless integration with your speakers. In addition, the integrated limiter helps protecting your subwoofer against overloading.
The back plate of SUB E-12 F features controls for volume adjustment, phase, and upper cut-off frequency, while the power on/off function works automatically via signal detection. And with the options for LFE or LINE inputs, this subwoofer easily accompanies any AV set up.
SUB E-12 F is elevated from the floor by an aluminium base, while a down-firing bass port allows positioning directly against the wall. The front grille is mounted by magnets only – and when removed, the visual appearance changes from discreet to extravagant as the pure aluminium cone is revealed.
The DALI SUB-12 F is recommended as compliment to the new ZENSOR series and is compatible with all DALI loudspeakers as the perfect completion of a DALI surround set up in your home theater.
SUB E-12 F Specifications
|
Product Series |
SUBWOOFERS |
|
Speaker Type |
Subwoofer |
|
Frequency Range (+/-3 dB) [Hz] |
28 - 190 |
|
Maximum SPL [dB] |
112 |
|
Crossover Frequency [Hz] |
40 - 120 |
|
Low Frequency Driver |
1 x 12" long stroke Polymere Aluminimum |
|
Enclosure Type |
Bass Reflex |
|
Bass Reflex Tuning Frequency [Hz] |
36.0 |
|
Max. Amplifier Power Output [RMS watt] |
220 |
|
Continous IEC Power Output [RMS watt] |
170 |
|
Input Impedance [Ω] |
25k |
|
Connection input(s) |
Mono line level (LFE) |
|
Magnetic Shielding |
No |
|
Recommended Placement |
Floor |
|
Recommended Distance From Wall [cm] |
> 5 |
|
Functions |
Crossover Frequency |
|
Maximum Power Consumption [W] |
250 |
|
Dimensions With Base (HxWxD) [mm] |
370 x 340 x 380 |
|
Weight [kg] |
14.7 |
|
Accessories Included |
Manual |
|
Finish |
Black Ash Vinyl |